W-DMX™ OEM Installed In RC4 W-DIM4 & W-DIMm3

8

The next-generation W-DIM4 and W-DIMm3 wireless dimmers are the latest dimmers from RC4 Wireless for use with Wireless Solution W-DMX systems. The W-DIM4 is a 4-channel wireless DMX receiver with four dimmers integrated into one small device. The W-DIMm3 is a wireless DMX receiver and three dimmers housed in a miniature device measuring only 80 x 40 x 20 mm.

The W-DIMm3 is a miniature wireless DMX receiver and 3-channel DC dimmer for use with Wireless Solution W-DMX transmitters. Its small size is ideal for use in props, practicals and costumes. A comprehensive RDM implementation is accessible when RDM functionality is enabled in the host W-DMX system. Each dimmer channel handles up to 50W at 12V. The device operates from 6V to 35VDC, and each dimmer can deliver 5A. Total device power handling, limited by input connections, is 10A. Over-temperature and over-current shut-down provide protection again wiring errors and load faults.

The W-DIM4 is a wireless DMX receiver and powerful 4-channel DC dimmer for use with Wireless Solution W-DMX transmitters. With its high output power it is designed for multiple channels of lighting on revolves and moving set pieces, ideal for stage, film, or video, particularly where high-power halogen lamps are required. A comprehensive RDM implementation is accessible when RDM functionality is enabled in the host W-DMX system. Each dimmer handles up to 150W at 12V. The device operates from 6V to 30VDC, and each dimmer can deliver 12A. Total device power handling, limited by input connections, is 40A. Over-temperature and over-current shut-down provide protection again wiring errors and load faults.

In both units, any DMX channel can be assigned to any dimmer, with a choice of non-dim, linear, or ISL curves optimized for smooth, flicker-free LED dimming. With RDM users can configure DMX channel, dimmer curve, pwm frequency and RC4 Digital Persistence response time for each individual dimmer output. RDM sensors monitor battery voltage, internal temperature, and current draw for each dimmer, including minimum and maximum readings. Non-RDM users can easily assign DMX channels, dimming curves, and more, using RC4 OneTouch: with one press of one button, any channel and curve can be assigned to a dimmer.

0 I like it
0 I don't like it

Leave a Reply

Your email address will not be published. Required fields are marked *