top of page

Robe rocks at the 2022 VMAs

The much‐anticipated 2022 MTV VMAs (Video Music Awards) proved every bit as thrilling, visually dramatic and sonically entertaining as music fans globally have come to expect of this high‐profile live broadcast extravaganza! This year it was staged at the Prudential Center in Newark, New York, and lit for the third year by Tom Sutherland of DX7 Design.

Tom, known for his fresh and innovative approach, utilized 229 Robe moving lights among others on a vast lighting rig that helped emcees Nikki Minaj, LL Cool J and Jack Harlow bring the onstage action – featuring 11 jaw‐dropping live performances – alive in a megamix of beams, color, textures, and movement.

Tom worked closely with set designer Heather Shaw from Vita Motus, camera director Liz Clare, creative director Paul Caslin, screens producer Trevor Burke from Visual Noise Creative and executive producers Bruce Gillmer, Jesse Ignjatovic and Barb Bialkowski to help craft the hi‐energy show everyone wanted. It featured two impressive and identical triangular‐shaped stages built at the long ends of the arena, both with LED floors and each with large upstage triangular LED screens. In the middle of one long side was the ‘MTV Entrance’ a large scenic graphic of the channel’s famous acronym, where artists entered the arena, stepping onto the chevron‐ shaped MTV Stage. A short tunnel at the back of the entrance revealed another LED screen, and the short runway also had an LED floor and sides. Much of the presenter action happened in this zone which was a popular celebrity ‘hot spot’.

Tom positioned 76 of his MegaPointes, 38 per screen, around the triangular LED screen perimeters on each stage, with eight more a side on two deck‐based diagonal raised ‘slip’ positions at the back of the artist / VIP area, either side of the MTV entrance. “MegaPointes were an easy choice,” stated Tom, “I needed something with plenty of power, definition and variety to cut through everything and enhance the geometry of the room, so MegaPointe was my go‐to!” Thousands of variant MegaPointe looks and mountains of dancing and piercing beam looks were crafted with some quick and super‐ smart programming to support the different artists’ performance narratives!

The main overhead roof truss structures were also designed largely on a triangular theme to keep the symmetry intact and to achieve the best lighting positioning. Dotted around this vast airspace were 85 x Robe BMFL WashBeams. Power and precision were again the main reasons for picking and deploying these. BMFL has been a favorite fixture of Tom’s for some time, and he continues to use them as a backbone for large scale spectacular shows like this. They were needed to cut through the brightness of the screens, helping eliminate shadows for the 22 camera positions as well as making up the base presenter and house lighting looks that defined the overall architecture and aesthetics … all from their 50ft trim height!

Thirty‐six Robe Spiiders were utilized in the tunnel behind the MTV stage and in its entranceway and for back lighting presenters on the chevron stage, and there were four Robe ESPRITES in the floor specials packages available on each stage.

Tom also capitalized on 16 x RoboSpot Systems. Eight remote controlled BMFLs per stage – comprising 10 x BMFL FollowSpots and 6 BMFL LT (Long Throw) fixtures – provided the principal key and back lighting. The fixtures were dotted all over the trussing network in the roof and offered the flexibility and punch needed to ensure everyone could always be lit optimally.

The RoboSpot base stations were all located on one of the venue concourses ensconced behind the big ‘M’ of the MTV entrance scenic piece. The operators had control of pan, tilt, iris, and dimmer, with all other parameters running through the main lighting console.

As always Tom worked alongside his own very talented team from DX7 Design to make this look awesome! Joe Holdman and Brian Jenkins were the man console operators, Joe taking care of the FX lighting including all the moving lights and all the LED pixels on the rig, and Brian ensuring that all the key lighting was in place and co‐ ordinating the RoboSpot system. They were joined by senior associate designer and lighting director Hunter Selby, lighting directors James Colidcott and Jasmine Lesane; lighting programmer Stefan Zubocic – who dealt with around 100,000 PixMob LED wristbands on site; and lighting intern Noah Bresler. The gaffer was Alen Sisul and the lighting techs were Dennis Sisul and John Cox, with media programmed by Kirk Miller.

All lighting kit was supplied by Solotech – managed by Harry Forster and Dave Evans – and Tom’s visual design also included approximately fifty lasers supplied by ER Productions.

All technical production had to be installed, tech’d, co‐ordinateld and programmed on site in two and a half weeks, making time the biggest challenge, especially given the show’s reputation for production excellence and everyone’s high expectations. “As always it was the teamwork, professionalism and the camaraderie that made it rock, not just from us in technical production, but those from every production aspect and all on the artists’ side, which made it so special, and such a slick operation that we were all proud to deliver,” concluded Tom.

Photos © Alive Coverage (Julian Cassady)


WhatsApp Image 2024-02-27 at 1.41.16 PM (1).jpeg
WhatsApp Image 2024-02-27 at 1.41.16 PM.jpeg
WhatsApp Image 2023-02-23 at 4.24.15 PM.jpeg
300x250 .gif
AVL 300×250 banner.gif
bottom of page